Setting Fence Posts In Concrete

Setting Fence Posts In Concrete

http://diyforknuckleheads.com How to concrete in a post. How to install a post in concrete is a very easy.
This short video covers supplies needed to set a wooden post in concrete, how to mix bagged concrete, pour.
How to Set Posts in Concrete (without mixing): This video shows you step-by-step instructions for how to set a.
The basis for a good fence or structure is a solid fence post. we show you how to set one to last and what to.
To help slow such deterioration, add pea gravel or crushed stone to the bottom of the posthole. Once you have added gravel to a depth of three inches or so, use a piece of scrap lumber to tamp down the layer. Next, pour an additional three inches of gravel into the hole, tamping down a second time.
Dig the holes the same way as you would to set posts in concrete. When setting fence posts in gravel, you should bury at least one-third of the fence post. Use crushed gravel to set the posts. Pour 5 in.
Set the post into the hole and attach 2×4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical. Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix.
Keep moisture and insects from destroying your cedar fence posts. latex caulk, or silicone specifically designed to adhere to concrete, at the base of the post.
Learn how to set a post without mixing concrete with QuickCrete fast setting. How to remove a fence post.

Read Also >>  8ft Wood Fence

Author:

Leave a Reply

Your email address will not be published. Required fields are marked *